Flange Adaptors

Our range of flange adaptors benefit from a broad tolerance for use with a variety of materials. The adaptor can be fitted to a grey cast iron, ductile cast iron and fibre cement pipes, and also to steel or PVC tubes. The range of adapters is available for continuous lengths of pipe with exterior diameters between DE 49 mm and 348 mm, and a PFA of 16 bar. The angular deflection is substantial at approximately 6°.Multi-pitch circle flange PN 10 and 16.

  • Diameter range: DN50 – DN300
  • Maximum operating temperature 40°C
  • Unique dynamic radial compression gasket sealing process eliminates post installation re-tightening
  • Maximum deflection 6° per joint
  • Rated to 16 bar working pressure (including products compatible with PN25 flanges)
  • Flange adaptor with universal flange to suit PN10, PN16 and certain other drillings (dependant on size)

Couplings

These products are used to join two pipes or tube spigot ends. Couplings are designed to be connected to pipes of different materials, or for use with one material only. UltraLink multi-materials couplings with very broad tolerance. This range of couplings is available for continuous lengths of pipe with exterior diameters between DE 49 mm and DE 348 mm, and a PFA of 16 bar. The angular deflection is approximately 6° per joint (12° between two pipes). 

  • Diameter range: DN50 – DN300
  • Maximum operating temperature 40°C
  • Unique dynamic radial compression gasket sealing process eliminates post installation re-tightening
  • Maximum deflection 6° per joint
  • Rated to 16 bar working pressure

Also available in Flange Adaptors & Couplings